Zubehör SOLJET Pro 4 XR-640 Drucker/Schneideplotter

Optionen

Modell Beschreibung
 ESL5-CY  ECO-SOL MAX3 Cyan, 220 cc
 ESL5-MG  ECO-SOL MAX3 Magenta, 220 cc
 ESL5-YE  ECO-SOL MAX3 Yellow, 220 cc
 ESL5-BK  ECO-SOL MAX3 Black, 220 cc
 ESL4-WH  ECO-SOL MAX2 White, 220 cc
 ESL4-MT  ECO-SOL MAX2 Metallic, 220 cc
 ESL5-5MG  ECO-SOL MAX3 Magenta, 500 cc
 ESL5-5YE  ECO-SOL MAX3 Yellow, 500 cc
 ESL5-5BK  ECO-SOL MAX3 Black, 500 cc
 ESL5-5LC  ECO-SOL MAX3 Light cyan, 500 cc
 ESL5-5LM  ECO-SOL MAX3 Light magenta, 500 cc
 ESL5-5LK  ECO-SOL MAX3 Light black, 500 cc
 SL-CL  Cleaning liquid cartridge, 220cc, 1pc
 ZEC-U5032  Cemented carbide blade for vinyl, fluorescent and reflective film, offset value 0.25 mm, 2 pcs
 ZEC-U5025  Cemented carbide blade for vinyl, fluorescent and reflective film, offset value 0.25 mm, 5 pcs
 ZEC-U5022  Cemented carbide blade for vinyl film, offset value 0.25 mm, 2 pcs
 ZEC-U1715  Cemented carbide blade for sandblast stencil, offset value 0.25 mm, 5 pcs
 ZEC-U3017  Cemented carbide blade for general signage vinyl, offset value 0.175 mm, 3 pcs
 ZEC-U1005  Cemented carbide blade for vinyl film, offset value 0.25 mm, 5 pcs
 ZEC-U3075  Cemented carbide blade for thick material and sandblast stencil, offset value 0.75 mm, 5 pcs (XD-CH4 Only)(*1)
 ZEC-U3050  Cemented carbide blade for thick material and sandblast stencil, offset value 0.50 mm, 5 pcs (XD-CH4 Only)(*1)
 ZEC-U5010  Cemented carbide blade for window film, offset value 0.5 mm, 2 pcs (XD-CH4 Only)(*1)
 ZEC-U3100  Cemented carbide blade for thick material and sandblast stencil, offset value 1.00 mm, 5 pcs (XD-CH4 Only)(*1)
 XD-CH2  Adjustable depth blade holder, Alloy tip
 XD-CH3  Adjustable depth blade holder, Plastic tip
 XD-CH4  NEW - Adjustable depth blade holder, Alloy tip - Black, Orange, Red
 1000007546
 Creasing tool for cardboard
 DU-640  Optional post dryer for XR-640
 6701409310  Cleaning Kit, 100ml cleaning fluid, 10 swabs
 11849102  Sheet cut blades, 25 pcs

Optional DU-640 heater and blower specifications
Dryer unit Heating type (with blower fan), setting range for the preset temperature: 30 to 55°C (*2)
Power requirements (*3) AC 100 to 120V ±10%, 5 A, 50/60 Hz or AC 220 to 240 V ±10%, 3 A, 50/60 Hz
Power consumption Approx. 650 W
Weight 26 kg
Power on Temperature: 15 to 32°C - (20°C or more recommended), humidity: 35 to 80% (no condensation)
Power off Temperature: 5 to 40°C, humidity: 20 to 80% (no condensation)
Included items Power cord, arms, bushing, cable clamps, stays, hexagonal wrench, bolts, washers, user's manual

*1
XR-640 maximum cutting force is 300g
*2      
Warm-up is required after powerup. This may require 5 to 20 minutes, depending on the operating environment.       
Depending on the ambient temperature and media width, the preset temperature may fail to be reached.       
*3      
Be sure to connect the machine to an unshared electrical circuit.       
Be sure to verify the amperage of the circuit breaker or fuse used.